AudioCodes E-SBC User Manual

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
■ [4] Start & End & Update Media = Sends a CDR at
the start of the media, upon an update in the media (if
occurs), and at the end of the media.
Note:
■ The parameter is applicable only to the SBC
application.
■ To enable CDR generation as well as enable signaling-
related CDRs, use the CDRReportLevel parameter.
'REST CDR Report Level'
configure system > cdr
> rest-cdr-report-level
[RestCdrReportLevel]
Enables signaling-related CDRs to be sent to a REST
server and defines the call stage at which they are sent.
■ [0] None = (Default) CDRs are not sent.
■ [1] End Call = CDRs are sent at the end (SIP BYE) of
each call.
■ [2] Start & End Call = CDRs are sent at the start (SIP
INVITE) and end of each call.
■ [3] Connect & End Call = CDRs are sent at call
connection (200 OK) and end of each call.
■ [4] Start & End & Connect Call = CDRs are sent at
the start, connection, and end of each call.
■ [5] Connect Only = CDRs are sent at call connection.
Note:
■ To specify the REST server, use the
[RestCdrHttpServer] parameter.
■ For the device to generate CDRs, you must enable
Syslog messaging (see the [EnableSyslog]
parameter).
■ CDRs are sent in JSON format.
'REST CDR HTTP Server
Name'
configure system > cdr
> rest-cdr-http-server
[RestCdrHttpServer]
Defines the REST server (by name as configured in the
Remote Web Services table) to where the device sends
CDRs through REST API.
The valid value is a string (i.e., name of the REST server).
By default, no value is defined.
Note:
■ The parameter value is case sensitive.
■ To enable CDR generation for the REST server, see
the [RestCdrReportLevel] parameter.
■ The REST server is configured in the Remote Web
Services table (see Configuring Remote Web Services
on page243).
'File Size'
configure troubleshoot
> cdr > file-size
[CDRLocalMaxFileSize]
Defines the size (in kilobytes) of each locally stored CDR
file. When the Current file reaches this size, the device
creates a CDR file containing all the CDRs from the
Current file.
The valid value is 100 to 10,000. The default is 1024.
- 1130 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English