AudioCodes E-SBC

CHAPTER68 Configuration Parameters Reference
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
Note: If this feature is configured for a specific IP
Profile, the settings of this global parameter is ignored
for calls associated with the IP Profile.
'AMD Sensitivity File'
[AMDSensitivityFileName]
Defines the name of the AMD Sensitivity file that
contains the AMD Parameter Suites.
Note:
■ This file must be in binary format (.dat). You can
use the DConvert utility to convert the original file
format from XML to .dat.
■ You can load this file using the Web interface (see
Loading Auxiliary Files).
[AMDSensitivityFileUrl] Defines the URL path to the AMD Sensitivity file for
downloading from a remote server for the Automatic
Update mechanism.
[AMDMinimumVoiceLength] Defines the AMD minimum voice activity detection
duration (in 5-ms units). Voice activity duration below
this threshold is ignored and considered as non-voice.
The valid value range is 10 to 100. The default is 42
(i.e., 210 ms).
[AMDMaxGreetingTime] Global parameter that defines the maximum duration
that the device can take to detect a greeting message.
You can also configure this feature per specific calls,
using IP Profiles (IpProfile_AMDMaxGreetingTime).
For a detailed description of the parameter and for
configuring this feature in the IP Profiles table, see
Configuring IP Profiles.
Note: If this feature is configured for a specific IP
Profile, the settings of this global parameter is ignored
for calls associated with the IP Profile.
[AMDMaxPostGreetingSilenceTime] Global parameter that defines the maximum duration of
silence from after the greeting time is over, configured
by [AMDMaxGreetingTime], until the device's AMD
decision. You can also configure this feature per
specific calls, using IP Profiles (IpProfile_
AMDMaxPostSilenceGreetingTime). For a detailed
description of the parameter and for configuring this
feature in the IP Profiles table, see Configuring IP
Profiles.
Note: If this feature is configured for a specific IP
Profile, the settings of this global parameter is ignored
for calls associated with the IP Profile.
[AMDTimeout] Defines the timeout (in msec) between receiving
Connect messages from the Tel side and sending
AMD results.
The valid range is 1 to 30,000. The default is 2,000
(i.e., 2 seconds).
- 1362 -