AudioCodes E-SBC User Manual

CHAPTER18 Core Entities
Mediant 1000 Gateway & E-SBC | User's Manual
Parameter Description
'IP Profile'
ip-profile-name
[IPGroup_ProfileName]
Assigns an IP Profile to the IP Group.
By default, no value is defined.
To configure IP Profiles, see Configuring IP Profiles.
'Media Realm'
media-realm-name
[IPGroup_MediaRealm]
Assigns a Media Realm to the IP Group. The Media
Realm determines the UDP port range and maximum
sessions on a specific interface for media traffic
associated with the IP Group.
By default, no value is defined.
To configure Media Realms, see Configuring Media
Realms.
Note: If you delete a Media Realm from the Media
Realms table that is assigned to the IP Group, the
parameter value reverts to None.
'Contact User'
contact-user
[IPGroup_ContactUser]
Defines the user part of the From, To, and Contact
headers of SIP REGISTER messages, and the user part
of the Contact header of INVITE messages received
from this IP Group and forwarded by the device to
another IP Group.
The valid value is a string of up to 60 characters. By
default, no value is defined.
Note:
■ The parameter is applicable only to Server-type IP
Groups.
■ The parameter is overridden by the ‘Contact User’
parameter in the Accounts table (see Configuring
Registration Accounts).
'SIP Group Name'
sip-group-name
[IPGroup_SIPGroupName]
Defines the SIP Request-URI host name in INVITE and
REGISTER messages sent to the IP Group, or the host
name in the From header of INVITE messages received
from the IP Group. In other words, it replaces the original
host name.
The valid value is a string of up to 100 characters. By
default, no value is defined.
Note:
■ If the parameter is not configured, the value of the
global parameter, ProxyName is used instead (see
Configuring Proxy and Registration Parameters).
- 348 -

AudioCodes E-SBC Specifications

General

Brand	AudioCodes
Model	E-SBC
Category	Gateway
Language	English