Installation & Operation Manual 242 Document # LTRT-92224
Mediant 8000
+-------------+ Error downloading kickstart file +-------------+
| |
| Unable to download the kickstart file. Please modify the |
| kickstart parameter below or press Cancel to proceed as an |
| interactive installation. |
| |
| hd:sdb1:/custom/ks-cd.cfg___________________________________ |
| |
| +----+ +--------+ |
| | OK | | Cancel | |
| +----+ +--------+ |
| |
+--------------------------------------------------------------+
7. Wait 5 seconds and press Enter twice to continue with the installation.
8. The OS installation will continue. It will take approximately 15 minutes to
complete and will be performed in a fully automatic mode. The installation
progress will be reported on the RS-232 serial console as follows:
+------------------+ Package Installation +------------------+
| |
| Name : parted-1.8.1-23.el5-i386 |
| Size : 1354k |
| Summary: The GNU disk partition manipulation program. |
| |
| |
| 38% |
| |
| Packages Bytes Time |
| Total : 237 503M 0:04:15 |
| Completed: 205 396M 0:03:21 |
| Remaining: 32 107M 0:00:54 |
| |
| 78% |
| |
+------------------------------------------------------------+
9. When the installation is complete, you will be prompted to reboot the SC board.
Press Enter to perform the reboot.
After the Linux OS installation, the SC board will be inaccessible from the IP
network (it will be assigned a non-routable local link IP address) and only the
following default users with default passwords will be defined on it:
Default Username Default Password
root root
acladmin pass_1234
To Next Page
Loading...
