EasyManua.ls Logo

AudioCodes Mediant 8000 - Page 594

AudioCodes Mediant 8000
924 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation & Operation Manual 594 Document # LTRT-92224
Mediant 8000
Parameter
Name
Type
Provisioning
Type
Description
Send Screening
Indicator to
ISDN
Enum
Not Overwrited(-
1), User
Provided(0), User
Passed(1), User
Failed(2), Network
Provided(3)
Instant Defines how the screening indicator of the
calling party's number (CPN) is generated
for IP-to-Tel calls.
Not Overwrited not configured
(interworking from IP to ISDN) or set to 0
for CAS.
User Provided CPN set by user, but not
screened (verified).
User Passed CPN set by user, verified
and passed.
User Failed CPN set by user, verified
and failed.
Network Provided CPN set by network.
Play Busy Tone
to Tel
Enum
Do Not Play, Play
When
Disconnecting,
Play Before
Disconnect
Instant Enables the device to play a busy or reorder
tone to the PSTN after a Tel-to-IP call is
released.
Don't Play Immediately sends an ISDN
Disconnect message.
Play when Disconnecting Sends an
ISDN Disconnect message with PI = 8
and plays a busy or reorder tone to the
PSTN (depending on the release cause).
Play before Disconnect Delays the
sending of an ISDN Disconnect message
for a user-defined time and plays a busy
or reorder tone to the PSTN. Applicable
only if the call is released from the IP
[Busy Here (486) or Not Found (404)]
before it reaches the Connect state;
otherwise, the Disconnect message is
sent immediately and no tones are
played.

Table of Contents

Related product manuals