Version 6.6 709 October 2014
Installation & Operation Manual 41. PSTN Gateway and IP-to-IP Applications
Parameter
Name
Type Provisioning
Type
Description
SBC Fax
Behavior
Enum
AsIs,HandleAlways,HandleOnReINV
ITE
Instant
negotiation
offer:
AsIs = Pass fax
transparently, without
interference (default).
Handle Always = Handle fax
according to fax settings in
the IP Profile for all offer-
answer transactions
(including the initial INVITE).
Handle On ReINVITE
=Handle fax according to fax
settings in the IP Profile for
all re-INVITE offer-answer
transactions (except for initial
INVITE)
SBC Fax
Offer Mode
Enum
AllCoders,SingleCoder
Instant Defines the coders included in
the outgoing SDP offer (sent to
the called "fax").
All = Use only (and all) the
coders of the selected
Coders Group ID configured
using the
SBCFaxCodersGroupID
parameter. (Default)
Single = Use only one coder.
If a coder in the incoming
offer (from the calling "fax")
matches a coder in the
SBCFaxCodersGroupID,
then the device uses this
coder. If no match exists,
then the device uses the first
coder listed in the Coders
Group ID
(SBCFaxCodersGroupID).