Installation & Operation Manual 710 Document # LTRT-92224
Mediant 8000
Parameter
Name
Type Provisioning
Type
Description
SBC Fax
Answer
Mode
Enum
AllCoders,SingleCoder
Instant Defines the coders included in
the outgoing SDP answer (sent
to the calling "fax").
All = Use matched coders
between the incoming offer
coders (from the calling
"fax") and the coders of the
selected Coders Group ID
(configured using the
SBCFaxCodersGroupID
parameter).
Single = Use only one coder.
If the incoming answer (from
the called "fax") includes a
coder that matches a coder
match between the incoming
offer coders (from the calling
"fax") and the coders of the
selected Coders Group ID
(SBCFaxCodersGroupID,
then the device uses this
coder. If no match exists,
then the device uses the first
listed coder of the matched
coders between the
incoming offer coders (from
the calling "fax") and the
coders of the selected
Coders Group ID (Default).
SBC
Remote
Early Media
Support
Enum
NotSupported,Supported
Instant This feature provides support for
interworking early media
between SIP UAs (IP Groups)
that support and do not support
receipt of early media.
It determines whether a remote
side can accept early media or
not.
[0] Not Supported = Early media
is not supported.
[1] Supported = (Default) Early
media is supported.
To Next Page
Loading...
