Version 6.6 735 October 2014
Installation & Operation Manual 43. Session Border Controller (SBC) Application
Parameter
Name
Type
Provision
ing Type
Description
SBC Coders
Preferences
Mode
Enum
NoExtentions,IncludeExtentions
Instant Determines the order of the
Extension coders (coders added if
there are no common coders
between SDP offered coders and
Allowed coders) and Allowed
coders (defined in the Allowed
Coders Group table) in the
outgoing SIP message (in the
SDP).
[NoExtentions] Doesn’t Include
Extensions = (Default)
Extension coders are added at
the end of the coder list.
[IncludeExtentions] Include
Extensions = Extension coders
and Allowed coders are
arranged according to their
order of appearance in the
Allowed Coders Group table.
Note: If the ‘SBC Extension
Coders Group’ parameter of the
IP Profile table is set to 'None' (the
coder group isn’t selected), this
parameter is not applicable.
SBC Bye
Authenticatio
n
Enum
Disable,Enable
Instant Enables the authentication of a
SIP BYE request before the call is
disconnected. . This feature
prevents, for example, a scenario
in which the SBC SIP client
receives a BYE request from a
third-party imposer assuming the
identity of a participant in the call
and as a consequence, the call
between the first and second
parties is inappropriately
disconnected.
To Next Page
Loading...
