Version 6.6 751 October 2014
Installation & Operation Manual 43. Session Border Controller (SBC) Application
Parameter
Name
Type
Provisioning
Type
Description
Destination
Address
String
Up to 20 chars
Instant The destination IP address (or domain
name, e.g., domain.com) to where the
outbound call is sent.
This parameter is applicable only if the
parameter 'Destination Type' is set to
'Dest Address'.
When using domain names, enter a DNS
server IP address or alternatively, define
these names in the 'Internal DNS Table'.
Destination Port Integer
1 – 65534
Instant Defines the destination port to where the
outbound call is sent.
Destination
Transport Type
Enum
Not Configured, UDP,
TCP, TLS
Instant Defines the transport layer type for
sending the outbound SIP IP calls.
When this parameter is set to Not
Configured, the transport type is
determined by the global SIP Transport
Type parameter.
To Next Page
Loading...
