Version 6.6 787 October 2014
Installation & Operation Manual 44. Media Gateway Software Backup/Restore Procedures
This SC board must be rebooted!
REBOOT now? ([y]/n) : y
Reboot ...
7. The SC board reboots. It typically takes 2 minutes to complete the reboot
process. The Media Gateway software starts automatically after the SC board
completes the reboot process.
8. After the SC board completes the reboot process, re-connect to its CLI interface
and login as a regular CLI user that you used to transfer the backup file (e.g.
acladmin). Remove the backup file from the SC board via the following
command:
client238::~# rm backup_12jan2009.bk
9. On the SC board in Slot 2 (designated as the Standby board), repeat steps 4-8.
To Next Page
Loading...
