Maintenance Object Repair Procedures
555-233-123
10-838 Issue 4 May 2002
76 FAIL The update files, load vintages, and announcements are
different in both SPEs. The Active SPE has the most
current announcements, and the Standby SPE has the
most current update file.
77 FAIL The update files, load vintages, translations, and
announcements are different in both SPEs. The Active
SPE has the most current translations and
announcements, and the Standby SPE has the most
current update file.
78 FAIL The update files, load vintages, translations, and
announcements are different in both SPEs. The Active
SPE has the most current announcements, and the
Standby SPE has the most current update file and
translations.
1. Follow the procedures for Error Code 4 to get the
correct load vintage. After running test card-mem
long, check for Error Codes 32 or 64. Follow the
recovery procedure under the applicable error code.
80 FAIL The update files and announcements are different in both
SPEs. The Standby SPE has the most current update file
and announcements.
1. Issue save announcements to save announcements
on both SPEs.
2. Follow the procedures for Error Code 64.
81 FAIL The update files, translations, and announcements are
different in both SPEs. The Active SPE has the most
current translations, and the Standby SPE has the most
current update file and announcements.
82 FAIL The update files, translations, and announcements are
different in both SPEs. The Standby SPE has the most
current update file, translations, and announcements.
1. Issue the save translations command.
2. Issue the save announcements command.
3. Follow the procedures for Error Code 64.
84 FAIL The update files, load vintages, and announcements are
different in both SPEs. The Standby SPE has the most
current update file and announcements.
Table 10-303. TEST #421 Flash Data Consistency Check Test — Continued
Error Code
Te s t
Result Description/Recommendation
Continued on next page
To Next Page
Loading...
