FW-DWNLD (Firmware Download)
Issue 4 May 2002
10-857555-233-123
3. Submit the schedule.
If you set the Schedule Download field to n, the download starts as
soon as you submit the schedule.
NOTE:
If you receive a SAT error message asking you to use the test
firmware download command, this means that there was a problem
with a previous firmware download. Run the test before proceeding.
Check specified resources
This procedure checks the header on the new firmware image file to ensure that
the firmware download runs as you intend.
1. Type test firmware download and press Enter.
The Test Results screen (Screen 10-11) appears.
Screen 10-11. Test Results screen
2. Look in the Result field for FAIL conditions.
3. If the test does not pass, refer to the ‘‘Error Log Entries and Test to Clear
Values’’ section.Resolve all errors.
4. Re-run the test (test firmware download).
When the test passes, all specified resources are available for the scheduled
download.
test firmware download SPE A
TEST RESULTS
Port Maintenance Name Alt. Name Test No. Result Error Code
FW-DWNLD 1413 PASS
To Next Page
Loading...
