Maintenance Object Repair Procedures
555-233-123
10-1010 Issue 4 May 2002
■ System resets do not reset the 6-day timer. If a system in License-Error
mode is reset and the license error remains, the timer picks up the
countdown where it left off.
■ To clear LIC-ERR alarms, the License File must match the switch hardware
and administered parameters.
License mode details
The license modes indicate the system’s operational status:
■ License-Normal
— License File installed successfully
— Feature usage within prescribed limits
— The license file serial number matches.
— If it is an upgrade, the switch requires a new License File.
■ License-Error
— License File serial number does not match the hardware
— System software versions do not match
— Feature usage exceeded
— System cannot verify the standby serial number (duplex only)
— License has expired
■ No-License
— System software versions do not match
— License File missing or could not be installed
— Offer Categories do not match
— The condition(s) that caused the system to enter License-Error
mode has not been corrected/resolved, and the 6-day countdown
timer has expired.
— The switch returns to License-Normal mode when the license errors
are cleared.
To Next Page
Loading...
