Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-444 Issue 4 May 2002
Background?
Run the command in the background, thus freeing the SAT (n /
y). The error results are tabulated in the error log, but no results
display on the terminal.
This option cannot be used if either the continuously or the
auto-page options are selected.
Failures?
Only failing test results display (n / y). Test results that pass or
abort are not displayed. The failures option has no effect if
entered with the background option.
All-ports?
Tests all customer translated line and trunk ports as well as a set
of untranslated line and trunk ports for boards listed in Table 8-16
(n / y).
Table 8-16. Test of ‘all ports’ option for the following boards:
Board
Number Description
Board
Number Description
TN413 Digital Line TN746 16 port Analog Line
TN417 Auxiliary Trunk TN747B Central Office Trunk
TN429 Direct Inward/
Outward Dialing Trunk
TN753 Direct-Inward-Dial Trunk
TN436 Direct Inward Dialing Trunk TN754 Digital Line
TN437 Tie Trunk TN760C Tie Trunk
TN438 Central Office Trunk TN762B Hybrid Line
TN439 Tie Trunk TN763C Auxiliary Trunk
TN447 Central Office Trunk TN767 DS1 Interface
TN458 Tie Trunk TN769 Analog Line with Message
Waiting
TN459 Direct Inward Dialing Trunk TN784 Digital Line
TN464C Universal DS1 TN785 16 port Analog Line
TN465 Central Office Trunk TN2135 Italian 16 Port Analog Line
TN467 8 port Analog line TN2136 Digital Line
TN468 16 port Analog line TN2138 International Central Office
Trunk
TN479 16 port Analog line TN2139 Direct Inward Dialing Trunk
TN497 Tie Trunk TN2140 Tie Trunk
TN556 ISDNBRI Line TN2144 Analog Line
Continued on next page
To Next Page
Loading...
