Datalogic Magellan 9800i - ACK NAK Error Handling

Enter/Exit Programming Mode
198 Magellan™ 9800i Scanner
RS-232 ACK NAK Error Handling
This item specifies the method the scanner will use to handle errors detected while waiting to
receive the ACK character from the host. Errors include unrecognized host commands and
communication errors such as parity or framing errors.
• Ignore Errors (recommended setting)
• Assume ACK (risk of lost label data)
• Assume NAK (risk of duplicate label)
To select the option for RS-232 ACK NAK Error Handling:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the desired option from the bar codes be
low. You’ll need to cover any unused bar
codes on this and the facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
032300(CR)
RS-232 ACK NAK Error Handling = Ignore Errors
032301(CR)
RS-232 ACK NAK Error Handling = Assume ACK
032302(CR)
RS-232 ACK NAK Error Handling = Assume NAK