Datalogic Magellan 9800i - Databar Expanded Length Control

Enter/Exit Programming Mode
290 Magellan™ 9800i Scanner
DataBar Expanded Length Control
This feature specifies either variable-length or fixed-length decoding for DataBar Expanded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below.
You’ll need to cover any unused barcodes on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
DEFAULT
04BD00(CR)
DataBar Expanded Length Control = Variable Length
04BD01(CR)
DataBar Expanded Length Control = Fixed Length