Datalogic Magellan 9800i User Manual

Programming
92 Magellan™ 9800i Scanner
Bar Code Mask
Cut a hole in this page and remove it from the manual as indicated to create a sleeve through
which bar codes (starting in the following section) can be individually viewed and scanned.
It is important that only one bar code at a time be presented to the scanner.
1
2
3
1. Bar Code Mask Sheet 3. Manual (folded)
2. Bar Code

Datalogic Magellan 9800i Specifications

General

Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Power consumption (typical)	12 W
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Built-in display	No

Weight and Dimensions

Weight	- g