Datalogic Magellan 9800i User Manual

432 Magellan™ 9800i Scanner
MSI Plessey
• Check character must be included in label data
• Label length including check character and excluding prefix character must meet
requirements imposed by the main scanner’s fixed or variable label length control for
this symbology type.
• Prefix must be an ASCII character ‘@’
• Example: ‘@144769254’
Code 93
• Prefix must be an ASCII character ‘&’
• Label length excluding prefix character must meet requirements imposed by the main
scanner’s fixed or variable label length control for this symbology type.
• Example: ‘&Code93-test’
GS1 DataBar Omnidirectional
• Prefix must be ASCII characters ‘R4’
• Check character must be included in label
• Application identifier “01” must follow the prefix and precede the base label
• Label length excluding prefix characters must be 16 characters.
• Example: ‘R40101044123456789’
GS1 DataBar Expanded
• Prefix must be ASCII characters ‘R4’
• Label length excluding prefix characters must be at least 1 character. Maximum length
is the maximum label size supported by the scanner.
• The format of the label must not be of the same format as RSS-14 (application id ‘01’
& length equal to 16)
• Example: ‘R4002900123456789083103001750’
Standard 2 of 5 (S 2 of 5)
• Prefix must be ASCII character ‘s’
• Label length excluding prefix character must meet requirements imposed by the main
scanner’s fixed or variable label length control for this symbology type.
• Example ‘s1234567890’
PDF 417
• Prefix must be ASCII character ‘P’
• Label length excluding prefix character cannot exceed 2714 characters +3, or 2717
characters. In addition to this, label length excluding prefix character must meet
requirements imposed by the main scanner’s fixed or variable label length control for
this symbology type.
• Example: ‘Ppdf test label’

Datalogic Magellan 9800i Specifications

General

Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Power consumption (typical)	12 W
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Built-in display	No

Weight and Dimensions

Weight	- g