Datalogic Magellan 9800i User Manual

Product Reference Guide 235
Chapter 13
1D Symbology Programming
1D Symbologies
NOTE
If the scanner’s interface type must be changed, always be sure that
interface configuration is the FIRST item scanned during a pro-
gramming session. (Selecting an inte
rface type resets ALL other
configuration items — including symbology programming — to
the factory default for that interface type.)
The following pages contain configuration information concerning the various bar code types
(symbologies) the scanner supports.

Datalogic Magellan 9800i Specifications

General

Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Power consumption (typical)	12 W
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Built-in display	No

Weight and Dimensions

Weight	- g