Enter/Exit Programming Mode
Product Reference Guide
103
Mobile Commerce Imagers
This feature specifies which imagers (see Figure 55) participate in a cell read
1
:
• Mobile Commerce only
• Mobile Commerce and Top Down Reader (TDR)
To set the desired option:
1. Scan the Enter/Exit Programmin
g Mode bar code.
2. Scan your selection from the bar codes below
. You’ll need to cover any unused bar
codes on this and the facing page to ensure that the scanner reads only the bar code you
intend to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode
bar code.
DEFAULT
Mobile Commerce Imagers = Mobile Commerce only
Mobile Commerce Imagers =Mobile Commerce + TDR
1. A cell read is a read which takes place on a device with a highly reflective display screen. Examples are cell phones, tablets, and some PC monitors
To Next Page
Loading...
