Product Reference Guide
91
Chapter 7
Programming
Introduction to Label Programming
The programming bar code labels contained in this manual will allow you to customize and
configure features and settings for your scanner (scanner/scale). To ensure full compatibility
and proper function, use only the programming bar codes in this manual and other product-
specific publications to program scanner features.
This manual has been developed to make it quick and easy for
users of all levels to find the
information needed to understand and configure features. The following descriptions will
help you to determine where to go from here.
Understanding the Basics
If you have little or no prior experience with programming using bar code labels, you should
review the first few pages of this section to familiarize yourself with the basics of scanner
programming before performing any changes to your configuration.
Using a Bar Code Mask
The programming bar codes in this manual have been placed as multiples per page. In order
to present them only one at a time to the scanner, a bar code mask is provided on the
opposite side of this page.
Going Green
Thank you for using the bar code mask on the opposite side of this page. This manual has
been formatted to minimize the quantity of pages needed to provide all of the programming
bar codes available for this product.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
