Datalogic Magellan 9800i - Code 32 Italian Pharmacode Enable

Enter/Exit Programming Mode
Product Reference Guide 305
Code 32 Italian Pharmacode Enable
Enables/disables the ability of the scanner to decode Italian Pharmaceutical Code 39 labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused barcodes
on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
DEFAULT
00EE00(CR)
Code 32 Italian Pharmacode Enable = Disable
00EE01(CR)
Code 32 Italian Pharmacode Enable = Enable