Datalogic Magellan 9800i - Databar Expanded EAN-128 Emulation

Enter/Exit Programming Mode
Product Reference Guide 287
DataBar Expanded EAN-128 Emulation
Enables/disables EAN 128 emulation for DataBar Expanded.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused barcodes
on
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
3. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
DEFAULT
04D500(CR)
DataBar Expanded EAN-128 Emulation = Disable
04D501(CR)
DataBar Expanded EAN-128 Emulation = Enable