Datalogic Magellan 9800i - Global AIM ID Enable

Enter/Exit Programming Mode
226 Magellan™ 9800i Scanner
Global AIM ID Enable
This option enables or disables the addition of the AIM ID to all bar code types except for EAN
128.
To set this option:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes
on this and
the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
03A900(CR)
Global AIM ID = Disable
03A901(CR)
Global AIM ID = Enable