Datalogic Magellan 9800i User Manual

Product Reference Guide 3
How to Use This Manual
You’ll find it helpful to familiarize yourself with the first section of this manual, since it provides
both a general description of the product’s features and an overview of the manual’s contents
and organization. Reference the other sections as required for information about scanner or
scanning-scale installation, operation, maintenance, calibration and bar code programming.
Manual Conventions
‘NOTE’ blocks contain information that is helpful and
recommended. They provide information that is critical
to operations and/or procedures described in this man-
ual.
LEGAL NOTE
‘LEGAL NOTE’ blocks indicate procedures or activities
which may be regulated under law by governmental
agencies. It is your responsibility to ensure compliance
with the regulations that govern installation of weigh-
ing devices.
‘CAUTION’ blocks inform you that proper handling
(adherence to the procedures described) is required to
avoid damage to equipment and/or property.
‘WARNING’ blocks alert you to potential physical harm
or injury. These statements do not include potentially
fatal hazards, which would be designated as ‘DANGER’
blocks. Use of this product does not warrant the need
for a DANGER block.

Datalogic Magellan 9800i Specifications

General

Type	Built-in bar code reader
Sensor type	-
Scanner type	1D/2D
Light levels (direct sunlight)	0 - 86080 lx
Linear (1D) barcodes supported	GS1 DataBar Expanded, GS1 DataBar Omnidirectional, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, Micro QR Code, QR Code, Small Aztec Code
Input voltage	100 - 240 V
Input frequency	50 - 60 Hz
Power source type	AC
Power consumption (standby)	11 W
Power consumption (typical)	12 W
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Product color	Black, Grey
Built-in display	No

Weight and Dimensions

Weight	- g