Datalogic Magellan 9800i - Price Weight Check

Enter/Exit Programming Mode
270 Magellan™ 9800i Scanner
Price Weight Check
Enables/disables calculation and verification of price/weight check digits. Applies to all UPC-A
and EAN/JAN-13 labels with eligible
1
Number System/First Character digits.
Options are:
•Disable
• 4-digit price/weight
• 5-digit price/weight
• 4-digit European price/weight
• 5-digit European price/weight
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the barcode representing the desired option belo
w or on the following pages. You’ll
need to cover any unused barcodes on facing pages to ensure that the scanner reads only
the barcode you intend to scan.
3. Complete the programming sequence by scanning the
Enter/Exit Programming Mode bar
code.
DEFAULT
005C00(CR)
Price Weight Check = Disable
005C01(CR)
Price Weight Check = 4-digit price/weight
005C02(CR)
Price Weight Check = 5-digit price/weight
1. Price Weight Check generally applies to UPC-A labels with a Number System Digit of 2 and EAN/JAN-13 labels with a First Charac-
ter of 2. There are a total of six flag digits corresponding to the six types. Checking applies depending upon which type is enab
led.