Enter/Exit Programming Mode
304
Magellan™ 9800i Scanner
Code 39 Require Margins
Enables/disables the requirement that quiet zones be present in a Code 39 bar code.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any unused bar codes
on this and
the facing page to ensure that the scanner reads only the bar code you intend
to scan.
3. Complete the programming sequence by scanning
the ENTER/EXIT Programming
Mode bar code.
DEFAULT
Code 39 Require Margins = Quiet Zones Not Required
Code 39 Require Margins = Quiet Zones Required
To Next Page
Loading...
