Freescale Semiconductor MPC5604B - 3. ADC Example with PIT and eMIOS

MPC5604B/C Microcontroller Reference Manual, Rev. 8
44 Freescale Semiconductor
F = Fast
1 2
I = Input only with analog feature
1
J = Input/Output with analog feature
X = Oscillator
4.6 System pins
The system pins are listed in Table 4-2.
4.7 Functional ports
The functional port pins are listed in Table 4-3.
Table 4-2. System pin descriptions
System
pin
Function
I/O
directio
n
Pad
typ
e
RESET
config.
Pin number
64 LQFP
1
1
Pin numbers apply to both the MPC560xB and MPC560xC packages.
100 LQFP 144 LQFP
208 MAPBGA
2
2
208 MAPBGA available only as development package for Nexus2+
RESET
Bidirectional reset with Schmitt-Trigger
characteristics and noise filter.
I/O M Input, weak
pull-up
only after
PHASE2
91721J1
EXTAL Analog output of the oscillator amplifier
circuit, when the oscillator is not in bypass
mode.
Analog input for the clock generator when the
oscillator is in bypass mode.
3
3
See the relevant section of the datasheet
I/O X Tristate 27 36 50 N8
XTAL Analog input of the oscillator amplifier circuit.
Needs to be grounded if oscillator is used in
bypass mode.
3
I X Tristate 25 34 48 P8