MPC5604B/C Microcontroller Reference Manual, Rev. 8
Freescale Semiconductor 19
Chapter 1
Preface
1.1 Overview
The primary objective of this document is to define the functionality of the MPC5604B microcontroller
for use by software and hardware developers. The MPC5604B is built on Power Architecture
®
technology
and integrates technologies that are important for today’s automotive vehicle body applications.
The information in this book is subject to change without notice, as described in the disclaimers on the title
page. As with any technical documentation, it is the reader’s responsibility to be sure he or she is using the
most recent version of the documentation.
To locate any published errata or updates for this document, visit the Freescale Web site at
http://www.freescale.com/.
1.2 Audience
This manual is intended for system software and hardware developers and applications programmers who
want to develop products with the MPC5604B device. It is assumed that the reader understands operating
systems, microprocessor system design, basic principles of software and hardware, and basic details of the
Power Architecture.
1.3 Guide to this reference manual
Table 1-1. Guide to this reference manual
Chapter
Description Functional group
#Title
2 Introduction General overview, family description, feature list and
information on how to use the reference manual in
conjunction with other available documents.
Introductory
material
3 Memory Map Memory map of all peripherals and memory. Memory map
4 Signal description Pinout diagrams and descriptions of all pads. Signals
5 Microcontroller Boot Boot
• Boot mechanism • Describes what configuration is required by the
user and what processes are involved when the
microcontroller boots from flash memory or serial
boot modes.
• Describes censorship.
• Boot Assist Module (BAM) Features of BAM code and when it's used.
• System Status and
Configuration Module
(SSCM)
Reports information about current state and
configuration of the microcontroller.
To Next Page
Loading...
