MPC5604B/C Microcontroller Reference Manual, Rev. 8
Freescale Semiconductor 903
Appendix B
Revision History
This appendix describes corrections to the MPC5604B Microcontroller Reference Manual. For
convenience, the corrections are grouped by revision.
B.1 Changes between revisions 7 and 8
Table B-1. Changes between revisions 7 and 8
Chapter Description
Throughout Editorial changes and improvements (including reformatting of memory maps, register
figures, and field descriptions to a consistent format).
Rearranged the chapter order.
Preface Added this chapter.
Introduction Changed the chapter title (was “Overview”, is “Introduction”).
Renamed “Introduction” to “The MPC5604B microcontroller family” and revised the section.
Renamed “Feature summary” to “Feature details”.
In the device-comparison table, deleted the note “All 64 LQFP information is indicative and
must be confirmed during silicon validation”.
Moved the “Memory map” section to its own separate chapter.
Deleted the duplicate device-comparison tables.
In the Packages section, added a line for the 64-pin LQFP.
Memory Map Added this chapter (content previously contained in the Overview chapter).
Changed “Test Sector Data Flash Array 0” to “Data test sector”.
Revised the numbers in the “Code Flash Sector” entries.
Changed “Flash Shadow Sector” to “Code Flash Shadow Sector”.
Changed “Code Flash Array 0 Test Sector” to “Code Flash Test Sector”.
Revised the numbers in the “Data Flash Array” entries.
Consolidated multiple adjacent reserved rows into single rows.
Signal Description Added the 64-pin LQFP package figure.
In the “Voltage supply pin descriptions” table, added pin 6 to the entry for VSS_HV in the
64-pin package.
Changed “Functional ports A, B, C, D, E, F, G, H” to “Functional ports”.
In the “Functional ports” table, changed ANP[0]–ANP[15] to GPI[0]–GPI[15].
Safety Migrated the chapter contents to the “Register Protection” and “SWT” chapters.
Microcontroller Boot Added this chapter.
To Next Page
Loading...
