556 Upgrade and Maintenance Manual RX2540 M4
5
Power-on
indicator
off The server is switched off.
green on
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for
a
specified time.
– The server is switc
hed on and
operating normally.
flashing
green
slowly
The BMC firmware is starting up after
the server has been connected to the
mains.
6
AC
connected
indicator
green on
– The server is switched of
f and
connected to the mains (standby
mode).
– The server has been switched on
but Power Cycle Delay settings
delay it from turning on for
a
specified time.
I After connecting the server to
the mains, it will take about 60
seconds until the server will
enter standby mode and can
be switched on.
off
– The server is switched off and not
connected to the mains.
– The server is switc
hed on and
operating normally.
Pos. Label Indicator Status Description
To Next Page
Loading...
