1-22
Description
Use the tcp timer syn-timeout command to configure the length of the TCP synwait timer.
Use the undo tcp timer syn-timeout command to restore the default.
By default, the value of the TCP synwait timer is 75 seconds.
Related commands: tcp timer fin-timeout, tcp window.
Examples
# Set the length of the TCP synwait timer to 80 seconds.
<Sysname> system-view
[Sysname] tcp timer syn-timeout 80
tcp window
Syntax
tcp window window-size
undo tcp window
View
System view
Default Level
2: System level
Parameters
window-size: Size of the send/receive buffer in KB, in the range 1 to 32.
Description
Use the tcp window command to configure the size of the TCP send/receive buffer.
Use the undo tcp window command to restore the default.
The size of the TCP send/receive buffer is 8 KB by default.
Related commands: tcp timer fin-timeout, tcp timer syn-timeout.
Examples
# Configure the size of the TCP send/receive buffer as 3 KB.
<Sysname> system-view
[Sysname] tcp window 3
To Next Page
Loading...
Need help?
General