1-7
Parameters
None
Description
Use the igmp-snooping command to enable IGMP snooping globally and enter IGMP-Snooping view.
Use the undo igmp-snooping command to disable IGMP snooping globally.
By default, IGMP snooping is disabled.
Related commands: igmp-snooping enable.
Examples
# Enable IGMP snooping globally and enter IGMP-Snooping view.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping]
igmp-snooping dot1p-priority
Syntax
igmp-snooping dot1p-priority priority-number
undo igmp-snooping dot1p-priority
View
VLAN view
Default Level
2: System level
Parameters
priority-number: Specifies 802.1p precedence for IGMP messages, in the range of 0 to 7. The higher the
number, the higher the precedence.
Description
Use the igmp-snooping dot1p-priority command to configure 802.1p precedence for IGMP
messages in a VLAN.
Use the undo igmp-snooping dot1p-priority command to restore the default.
The default 802.1p precedence for IGMP messages is 0.
Before configuring this command in a VLAN, enable IGMP Snooping in the VLAN.
Related commands: igmp-snooping enable.
Examples
# Enable IGMP Snooping in VLAN 2 and set 802.1p precedence for IGMP messages in the VLAN to 3.
<Sysname> system-view
To Next Page
Loading...
Need help?
General