1-1
1 FTP Configuration Commands
FTP Server Configuration Commands
display ftp-server
Syntax
display ftp-server
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display ftp-server command to display the FTP server configuration.
After configuring FTP server parameters, you may verify them with this command.
Related commands: ftp server enable, ftp timeout, ftp update.
Examples
# Display the FTP server configuration.
<Sysname> display ftp-server
FTP server is running
Max user number: 1
User count: 1
Timeout value(in minute): 30
Put Method: fast
Table 1-1 display ftp-server command output description
Field Description
Max user number Maximum number of login users at a time
User count Number of the current login users
Timeout value (in minute)
Allowed idle time of an FTP connection. If there is no packet
exchange between the FTP server and client during the whole
period, the FTP connection will be disconnected.
To Next Page
Loading...
Need help?
General