1-32
|
├-(P_1/10)<-->(P_4/1)[Sysname:00e0-fc05-4300]
|
â””-(P_1/8)<-->(P_1/12)[aaa_1.Sysname:00e0-fc00-7016]
Table 1-6 display cluster base-topology command output description
Field Description
PeerPort
Peer port
ConnectFlag Connection flag: <-->
NativePort
Local port
SysName System name of the peer device
DeviceMac MAC address of the peer device
display cluster black-list
Syntax
display cluster black-list
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display cluster black-list command to display the current blacklist of a cluster.
Note that this command can be executed on the management device only.
Examples
# View the current blacklist of the cluster.
<aaa_0.Sysname> display cluster black-list
Device ID Access Device ID Access port
00e0-fc00-0010 00e0-fc00-3550 GigabitEthernet1/0/1
Table 1-7 display cluster black-list command output description
Field Description
Device ID
ID of the blacklist device, indicated by its MAC address.
Access Device ID
ID of the device connected to the blacklist device,
indicated by its MAC address.
Access port
Port connected to the blacklist device.
To Next Page
Loading...
Need help?
General