1-14
Table 1-1 display dhcp relay all command output description
Field Description
Server-group DHCP server group number correlated to the interface.
display dhcp relay information
Syntax
display dhcp relay information { all | interface interface-type interface-number }
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays the Option 82 configuration information of all interfaces.
interface interface-type interface-number: Displays the Option 82 configuration information of a
specified interface.
Description
Use the display dhcp relay information command to display Option 82 configuration information on
the DHCP relay agent.
Examples
# Display the Option 82 configuration information of all interfaces.
<Sysname> display dhcp relay information all
Interface: Vlan-interface100
Status: Enable
Strategy: Replace
Format: Verbose
Circuit ID format-type: HEX
Remote ID format-type: ASCII
Node identifier: abaci
User defined:
Circuit ID: company001
Interface: Vlan-interface200
Status: Enable
Strategy: Keep
Format: Normal
Circuit ID format-type: HEX
Remote ID format-type: ASCII
User defined:
Remote ID: device001
To Next Page
Loading...
Need help?
General