1-3
<Sysname> system-view
[Sysname] clock summer-time abc1 one-off 6 08/01/2006 6 09/01/2006 1
clock summer-time repeating
Syntax
clock summer-time zone-name repeating start-time start-date end-time end-date add-time
undo clock summer-time
View
System view
Default Level
3: Manage level
Parameters
zone-name: Name of the daylight saving time, a string of 1 to 32 characters.
start-time: Start time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros in the argument
can be omitted except for indicating 0 hours.
start-date: Start date which can be set in two ways:
z Enter the year, month and date at one time, in the format of MM/DD/YYYY (months/days/years) or
YYYY/MM/DD.
z Enter the year, month and date one by one, separated by spaces. The year ranges from 2000 to
2035; the month can be January, February, March, April, May, June, July, August,
September, October, November or December; the start week can be the first, second, third,
fourth, fifth or last week of the month; the start date is Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday.
end-time: End time, in the format of HH:MM:SS (hours/minutes/seconds). The zeros in the argument
can be omitted except for indicating 0 hours.
end-date: End date which can be set in two ways:
z Enter the year, month and date at one time, in the format of MM/DD/YYYY (months/days/years) or
YYYY/MM/DD.
z Enter the year, month and date one by one, separated by spaces. The year ranges from 2000 to
2035; the month can be January, February, March, April, May, June, July, August, September,
October, November or December; the end week can be the first, second, third, fourth, fifth or
last week of the month; the end date is Sunday, Monday, Tuesday, Wednesday, Thursday,
Friday, Saturday.
add-time: Time added to the current standard time of the device, in the format of HH:MM:SS
(hours/minutes/seconds). The zeros in the argument can be omitted except for indicating 0 hours.
Description
Use the clock summer-time repeating command to adopt summer-time repeatedly.
Use the undo clock summer-time command to cancel the configuration of the daylight saving time.
By default, daylight saving time is configured on the device, and the universal time coordinated (UTC)
time zone is applied.
To Next Page
Loading...
Need help?
General