1-12
Table 1-5 display qos policy interface command output description
Field Description
Interface Interface type and interface number
Direction
The direction in which the policy is applied to the
interface
Policy Name of the policy applied to the interface
Classifier
Class name and corresponding configuration
information
Operator
Logical relationship between match criteria in the
class
Rule(s) Match criteria in the class
Behavior
Behavior name and corresponding configuration
information
qos apply policy
Syntax
qos apply policy policy-name inbound
undo qos apply policy inbound
View
Interface view, port group view
Default Level
2: System level
Parameters
inbound: Inbound direction.
policy-name: Specifies a policy name, a string of 1 to 31 characters.
Description
Use the qos apply policy command to apply a QoS policy.
Use the undo qos apply policy command to remove the QoS policy.
Examples
# Apply policy USER1 in the inbound direction of GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos apply policy USER1 outbound
To Next Page
Loading...
Need help?
General