H3C S5120-SI Series

1-7
++++++++
++++++++
# Create a local DSA key pair.
<Sysname> system-view
[Sysname] public-key local create dsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits of the modulus[default = 1024]:
Generating Keys...
*
*
public-key local destroy
Syntax
public-key local destroy { dsa | rsa }
View
System view
Default Level
2: System level
Parameters
dsa: DSA key pair.
rsa: RSA key pair.
Description
Use the public-key local destroy command to destroy the local key pair(s).
Related commands: public-key local create.
Examples
# Destroy the local RSA key pairs.
<Sysname> system-view
[Sysname] public-key local destroy rsa
Warning: Confirm to destroy these keys? [Y/N]:y
# Destroy the local DSA key pair.
<Sysname> system-view
[Sysname] public-key local destroy dsa
Warning: Confirm to destroy these keys? [Y/N] :y