H3C S5120-SI Series

2-1
2 MIB Configuration Commands
MIB Configuration Commands
display mib-style
Syntax
display mib-style
View
Any view
Default Level
3: Manage level
Parameters
None
Description
Use the display mib-style command to display the MIB style of the device.
Two MIB styles are available on the device: new and compatible. After obtaining the MIB style, you can
select matched H3C network management software based on the MIB style.
Related commands: mib-style.
Examples
# After getting the device ID from node sysObjectID, you find that it is an H3C device, and hope to
know the current MIB style or the MIB style after next boot of the device.
<Sysname> display mib-style
Current MIB style: new
Next reboot MIB style: new
The above output information indicates that the current MIB style of the device is new, and the MIB style
after next boot is still new.
mib-style
Syntax
mib-style [ new | compatible ]
View
System view