1-12
View
Any view
Default Level
2: System level
Parameters
None
Description
Use the display reboot-type command to display the reboot mode of the device.
Examples
# Display the reboot mode of the device.
<Sysname> display reboot-type
The rebooting type this time is: Cold
The above information indicates that the last reboot mode of the device is Cold boot (cold boot is to
restart a device by powering it on). (The display of Warm represents a warm boot, which means to
restart a device by using the commands like reboot).
display schedule job
Syntax
display schedule job
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display schedule job command to display the detailed configurations of the scheduled
automatic execution function.
Examples
# Display the detailed configurations of the current scheduled automatic execution function.
<Sysname> display schedule job
Specified command: execute 1.bat
Specified view: system view
Executed time: at 12:00 10/31/2007 (in 0 hours and 16 minutes)
To Next Page
Loading...
Need help?
General