H3C S5120-SI Series Command Reference

1-6
ssh server enable
Syntax
ssh server enable
undo ssh server enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the ssh server enable command to enable the SSH server function.
Use the undo ssh server enable command to disable the SSH server function.
By default, SSH server is disabled.
Examples
# Enable SSH server.
<Sysname> system-view
[Sysname] ssh server enable
ssh server rekey-interval
Syntax
ssh server rekey-interval hours
undo ssh server rekey-interval
View
System view
Default Level
2: System level
Parameters
hours: Server key pair update interval in hours, in the range 1 to 24.
Description
Use the ssh server rekey-interval command to set the interval for updating the RSA server key.
Use the undo ssh server rekey-interval command to restore the default.
By default, the update interval of the RSA server key is 0, that is, the RSA server key is not updated.

H3C S5120-SI Series Specifications

General

Brand	H3C
Model	S5120-SI Series
Category	Switch
Language	English