H3C S5120-SI Series

1-7
Related commands: binary.
Examples
# Set the file transfer mode to ASCII.
[ftp] ascii
200 Type set to A.
binary
Syntax
binary
View
FTP client view
Default Level
3: Manage level
Parameters
None
Description
Use the binary command to set the file transfer mode to binary (also called flow mode).
By default, the transfer mode is ASCII mode.
Related commands: ascii.
Examples
# Set the file transfer mode to binary.
[ftp] binary
200 Type set to I.
bye
Syntax
bye
View
FTP client view
Default Level
3: Manage level
Parameters
None