H3C S5120-SI Series

1-14
By default, the system will not lock the current user interface automatically.
Examples
# Lock the current user interface.
<Sysname> lock
Please input password<1 to 16> to lock current user terminal interface:
Password:
Again:
locked !
# Cancel the lock.
Password:
Again:
<Sysname>
parity
Syntax
parity { even | mark | none | odd | space }
undo parity
View
AUX interface view
Default Level
2: System level
Parameters
even: Performs even checks.
mark: Performs mark checks.
none: Does not check.
odd: Performs odd checks.
space: Performs space checks.
Description
Use the parity command to set the check mode of the user interface.
Use the undo parity command to revert to the default check mode.
No check is performed by default.