2-1
2 Configuration File Management Commands
Configuration File Management Commands
archive configuration
Syntax
archive configuration
View
User view
Default Level
3: Manage level
Parameters
None
Description
Use the archive configuration command to save the current running configuration manually.
After the execution of this command, the system saves the current running configuration with the
specified filename (filename prefix + serial number) to the specified path.
Note the following:
Before executing the archive configuration command, you must configure the filename prefix and
path of the saved configuration file by using the archive configuration location command.
Examples
# Save the current running configuration manually.
<Sysname> archive configuration
Warning: Save the running configuration to an archive file. Continue? [Y/N]: Y
Please wait...
Info: The archive configuration file myarchive_1.cfg is saved.
archive configuration interval
Syntax
archive configuration interval minutes
undo archive configuration interval
View
System view
To Next Page
Loading...
Need help?
General