1-3
free ftp user
Syntax
free ftp user username
View
User view
Default Level
3: Manage level
Parameters
username: Username. You can use the display ftp-user command to view the logged-in user name of
the current FTP connection.
Description
Use the free ftp user command to manually release the FTP connection established with the specified
username.
Note that if the user to be released is transmitting a file, the connection between the user and the FTP
server is terminated after the file transmission.
Examples
# Manually release the FTP connection established with username ftpuser.
<Sysname> free ftp user ftpuser
Are you sure to free FTP user ftpuser? [Y/N]:y
<Sysname>
ftp server acl
Syntax
ftp server acl acl-number
undo ftp server acl
View
System view
Default Level
3: Manage level
Parameters
acl-number: Basic access control list (ACL) number, in the range 2000 to 2999.
Description
Use the ftp server acl command to control FTP clients’ access to the device using an ACL.
Use the undo ftp server acl command to restore the default.
By default, no ACL is used to control FTP clients’ access to the device.
To Next Page
Loading...
Need help?
General