1-15
ip (PKI entity view)
Syntax
ip ip-address
undo ip
View
PKI entity view
Default Level
2: System level
Parameters
ip-address: IP address for an entity.
Description
Use the ip command to configure the IP address of an entity.
Use the undo ip command to remove the configuration.
By default, no IP address is specified for an entity.
Examples
# Configure the IP address of an entity as 11.0.0.1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] ip 11.0.0.1
ldap-server
Syntax
ldap-server ip ip-address [ port port-number ] [ version version-number ]
undo ldap-server
View
PKI domain view
Default Level
2: System level
Parameters
ip-address: IP address of the LDAP server, in dotted decimal format.
port-number: Port number of the LDAP server, in the range 1 to 65535. The default is 389.
version-number: LDAP version number, either 2 or 3. By default, it is 2.
Description
Use the ldap-server command to specify an LDAP server for a PKI domain.
To Next Page
Loading...
Need help?
General