1-19
Field Description
Default Domain Name Default ISP domain name
Total 2 domain(s). 2 ISP domains in total
display local-user
Syntax
display local-user [ idle-cut { disable | enable } | service-type { ftp | lan-access | ssh | telnet |
terminal } | state { active | block } | user-name user-name | vlan vlan-id ]
View
Any view
Default Level
1: Monitor level
Parameters
idle-cut { disable | enable }: Specifies local users with the idle cut function disabled or enabled.
service-type: Specifies the local users of a type.
z ftp refers to users using FTP.
z lan-access refers to users accessing the network through an Ethernet, such as 802.1X users.
z ssh refers to users using SSH.
z telnet refers to users using Telnet.
z terminal refers to users logging in through the console port, AUX port, or Asyn port. Supported port
types vary by the device model.
state { active | block }: Specifies all local users in the state of active or block. A local user in the state of
active can access network services, while a local user in the state of blocked cannot.
user-name user-name: Specifies all local users using the specified username. The username is a
case-sensitive string of 1 to 55 characters and does not contain the domain name.
vlan vlan-id: Specifies all local users in a VLAN. The VLAN ID ranges from 1 to 4094.
Description
Use the display local-user command to display information about specified or all local users.
Related commands: local-user.
Examples
# Display information about all local users.
<Sysname> display local-user
The contents of local user abc:
State: Active
ServiceType: ftp
Access-limit: Enable Current AccessNum: 0
Max AccessNum: 300
User-group: system
To Next Page
Loading...
Need help?
General