1-2
z The name of an ACL must be unique among ACLs.
z If you specify both an ACL number and an ACL name in one command to enter the view of an
existing ACL, be sure that the ACL number and ACL name identify the same ACL.
z You can change match order only for ACLs that do not contain any rules.
Examples
# Create basic ACL 2000, and enter its view.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000]
# Create basic ACL 2001, named flow, and enter its view.
<Sysname> system-view
[Sysname] acl number 2001 name flow
[Sysname-acl-basic-2001-flow]
acl copy
Syntax
acl copy { source-acl-number | name source-acl-name } to { dest-acl-number | name dest-acl-name }
View
System view
Default Level
2: System level
Parameters
source-acl-number: Specifies a source ACL that already exists by its number:
z 2000 to 2999 for basic ACLs
z 3000 to 3999 for advanced ACLs
z 4000 to 4999 for Ethernet frame header ACLs
name source-acl-name: Specifies a source ACL that already exists by its name. The source-acl-name
argument takes a case insensitive string of 1 to 32 characters.
dest-acl-number: Assigns a unique number for the ACL you are creating. This number must be from the
same ACL category as the source ACL. Available value ranges include:
z 2000 to 2999 for basic ACLs
z 3000 to 3999 for advanced ACLs
z 4000 to 4999 for Ethernet frame header ACLs
name dest-acl-name: Assigns a unique name for the ACL you are creating. The dest-acl-name takes a
case insensitive string of 1 to 32 characters. It must start with an English letter and, to avoid confusion,
cannot be all. For this ACL, the system automatically picks the smallest number from all available
numbers in the same ACL category as the source ACL.
To Next Page
Loading...
Need help?
General