1-9
ssl server-policy
Syntax
ssl server-policy policy-name
undo ssl server-policy { policy-name | all }
View
System view
Default Level
2: System level
Parameters
policy-name: SSL server policy name, a case-insensitive string of 1 to 16 characters, which cannot be
“a”, “al” and “all”.
all: Specifies all SSL server policies.
Description
Use the ssl server-policy command to create an SSL server policy and enter its view.
Use the undo ssl server-policy command to delete a specified or all SSL server policies.
Note that you cannot delete an SSL server policy that has been associated with one or more application
layer protocols.
Related commands: display ssl server-policy.
Examples
# Create SSL server policy policy1 and enter its view.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1]
version
Syntax
version { ssl3.0 | tls1.0 }
undo version
View
SSL client policy view
Default Level
2: System level
Parameters
ssl3.0: Specifies SSL 3.0.
tls1.0: Specifies TLS 1.0.
To Next Page
Loading...
Need help?
General